~
48
~
5.
Do not modify the plug provided with the appliance, if it will not fit the
outlet, have a proper outlet installed by a qualified electrician (
not
covered by the guarantee
).
6. Never try to repair the appliance yourself. Repairs carried out by
unauthorised persons can cause serious damage. If the appliance
does not operate properly, please contact the aftersales service
or
the shop you purchased the appliance at.
8
Original spare parts
should be used only.
7. Always check that the power cord is not placed under the appliance
or damaged by moving the appliance.
8. When the power cord is damaged, it must be replaced by the
manufacturer or an authorised aftersales service or a qualified
professional only.
9.
Never
pull the power supply cable to unplug the appliance. Always
use the power plug itself to unplug the appliance. RISK OF
ELECTRIC SHOCK!
10.
Never
touch the power plug, the power switch or other electrical
components with wet or damp hands. RISK OF ELECTRIC SHOCK!
WARNING!
To reduce the risk of burns, electrocution, fire or injury to persons
1. Unplug the appliance after operation.
2. Disconnect the appliance from the mains before you clean or
maintain it.
3. Operate the appliance with 220 ~ 230 V / 50 Hz AC only. Use a
suitable safety-socket near of the appliance.
4.
The appliance must always be grounded and protected
corresponding to the requirements of your local energy supplier. The
main current circuit must be equipped with a safety shut-down
device.
5. All electrical work that may be necessary must be carried out by a
qualified professional.
6.
After installation, the power plug and the safety socket must be
always easily-accessible.
7.
In case of an event caused by a technical malfunction, disconnect
the appliance from the mains (fuse box of your household power
supply). Contact the aftersales service
or
the shop you purchased
the appliance at.
9
8
Depending on model: s. page « S
ERVICE INFORMATION
» at the end of this instruction manual.
9
Depending on model: s. page « S
ERVICE INFORMATION
» at the end of this instruction manual.