69
1.
Switch off the appliance is disconnect it from the mains.
2.
Open the cover panel of the drain pump filter.
3.
Place a container in front of the opening.
4.
Open the drain pump filter, but do not remove it completely. Rotate the drain
pump filter in anti-clockwise direction until the water begins to run.
5.
Wait until the water has drained completely.
6.
Unscrew the drain pump filter completely and remove it.
7.
Clean the drain pump filter.
8.
Check that the pump rotor can move freely.
9.
Insert the drain pump filter and screw it in as far as possible in clockwise
direction.
10.
Check that the drain pump filter is installed properly.
11.
Install the cover panel.
(Fig. similar: Figures serve as an example only)
5.3 Residual water drainage
1.
Switch off the appliance is disconnect it from the mains.
2.
Remove the cover panel of the drain pump filter.
3.
Place a container in front of the opening.
4.
Open the drain pump filter, but do not remove it completely. Rotate the drain
pump filter in anti-clockwise direction until the water begins to run.
5.
Wait until the water has drained completely.
6.
Unscrew the drain pump filter completely and remove it.
7.
Carefully tilt the appliance forward so the water can be drained.
8.
Insert the drain pump filter and screw it in as far as possible in clockwise
direction.
9.
Check that the drain pump filter is installed properly.
10.
Install the cover panel.
CAUTION!
Ensure before residual water drainage that the water has
cooled down completely. RISK OF SCALDING! RISK OF BURNS!