66
1.
Unpack the appliance carefully. Dispose of the packaging as described in chapter
waste management.
2.
Remove all packaging materials.
3.
The accessories of your appliance can be protected from damage due to
transportation (adhesive tapes etc.). Remove such tapes very carefully. Remove
remains of such tapes with a damp cloth using lukewarm water and a mild detergent
(see also chapter
CLEANING AND MAINTENANCE
). Never remove any components
of the back of the appliance!
4.
Install the appliance in a suitable position with an adequate distance from sources of
heat and cold.
5.
If installation near a heat source is unavoidable, use a suitable insulation plate or
keep the following
minimum distances
to the heat source:
To electric cookers
at least 30 mm
To radiators or ovens
at least 300 mm
To another refrigerators
at least 20 mm
6.
Check that the appliance and the power cord are not damaged.
7.
Install the appliance in a dry and well-ventilated place.
8.
Protect the appliance from direct sunlight.
9.
The door(s) must open completely and without hindrance.
10.
Install the appliance on a level, dry and solid floor. Check the correct installation
with a bubble level.
11.
Connect the appliance to the mains properly.
12.
The rating plate is inside the appliance or at the back.
3.2 Space and ventilation requirements
Observe the required minimum distances for proper ventilation (s. chapter 3.2.2
V
ENTILATION
).
