29
is near the appliance. The appliance must be grounded.
3.
Check that the appliance does not stand on the power cord.
4.
If the power cord is damaged, it must be replaced by the manufacturer or its
service agent or a similar qualified person in order to avoid any kind of hazard.
5.
The power cord must not contact parts of the appliance which become hot.
6.
Check that the technical data of your energy supply meet the values on the
nameplate.
7.
Your domestic circuit must be equipped with an automatic circuit breaker.
8.
Protect the power cord with a strain relief clamp.
9.
Do not attempt to repair the appliance alone. Repairs carried out by
unauthorized persons can cause serious damage. Always contact the nearest
service centre and use original spare parts only.
10.
Colours of the wires:
yellow-green
Ground (E)
blue
Neutral (N)
brown
Phase (L)
11.
The electrical feed line must not contact parts of the appliance, which may
become hotter than 50
0
C above room-temperature.
12.
If you use a plug, the plug and the socket must meet all current local and legal
requirements.
WARNING!
Do not use a socket board or a multi socket or an extension cord
when using
220–240 V/50 Hz alternate current (AC).All electrical connections which may be
damaged must be repaired by a qualified professional.
All repairs should be performed by your authorized after sales service.
Gas supply
DANGER!
The connection to the gas supply must be carried out by a qualified
professional. Do not modify the gas supply.
The connection must be carried out
relevant to the current local and legal regulations.
Standard factory setting for operation mode: natural gas.
