38
Replacing of the illuminant
1.
Switch off the appliance and disconnect it from the mains
2.
Remove the cover. Clean the cover and wipe it dry.
3.
Remove the illuminant and replace it by a new one of the same kind and power:
Heat-proof illuminant for ovens (300
0
C), 230V/25W, E 14 thread.
4.
Install the cover.
Removing of the door
1.
Open the door and push the safety
catch upwards.
2.
Close the door slightly.
3.
Lift the door and pull it towards
your direction.
4.
To reassemble proceed in reverse
order.
5.
Check that the groove of the hinge
bracket is positioned properly in its
guide.
6.
After reassembling the door close the safety catch carefully.
7.
If the safety catch is not closed properly you will damage the hinges when
closing the door.
Removing of the glass panel
1.
Unscrew and unfasten the bracket
latch that is in the corner at the top
of the door.
2.
Take out the glass from the second
blocking mechanism and remove it.
3.
After cleaning, insert and block the glass panel.
4.
Screw in the blocking mechanism..