64
Appliance does not work at all.
1.
The fuse in the fuse box is tripped.
2.
The appliance is not supplied with
energy.
3.
Low water pressure.
1.
Check the fuse box.
2.
Check that the appliance is supplied
with energy / the door is closed
properly / the plug is in the socket.
3.
Check the water supply.
Drain pump works permanently.
➢
Overflow.
➢
The appliance identifies an
overflow. In such a case it activates
the drain pump and deactivates the
circulation pump.
Noise.
1.
Some noise is normal.
2.
Dishes are placed improperly. Small
objects dropped out of the racks.
3.
Motor hums.
1.
The detergent container has
opened.
2.
Check the position of the dishes.
3.
Appliance was not used regularly.
Even if you do not use the
appliance regularly, let it operate
once a week.
Foam in the appliance.
➢
Unsuitable detergent.
➢
Spilled rinse aid.
➢
Use dishwasher detergent only.
Open the door and wait until the
foam has evaporated. Pour approx.
4 litres of water in the appliance.
Close the door and select the pre-
wash programme. Repeat procedure
if need be.
Stained interior.
➢
Detergent contains colorants.
➢
Use colorant-free detergents.
Dishes are not clean.
1.
Unsuitable programme.
2.
Dishes are placed improperly.
1.
Select a stronger programme.
2.
Check the position of the dishes.
The dishes must not block the spray
arms.
Spots and film on glasses and cutlery.
➢
Extremely hard water.
➢
Very low temperature of the water
supply.
➢
Appliance is overfilled.
➢
Dishes are placed improperly.
➢
Old or wet pulvered detergent.
➢
Rinse aid container is empty.
To remove spots from glassware:
1.
Remove all metal-made objects.
2.
Do not use a detergent.
3.
Select the longest programme.
4.
Start the programme. After 18-22
minutes the main-wash cycle begins.