21
Extraction mode:
Install the swing check valve on the air outlet.
Installation, option 1 / wall (fig.1):
1.
Drill the holes with a diameter of 8 mm (lock at fig.1). For drilling check the
relevant position of the screw-holes on the back of the appliance.
2.
Insert the dowels in the holes.
3.
Tighten the screws in the dowels.
4.
Hang the appliance on the screws.
5.
Extraction mode only: Install the exhaust pipe
3
and lead it to a suitable exhaust
air duct or outside.
Installation, option 2 / below furniture (fig.2):
1.
Drill six holes with a diameter of 4 mm into the bottom of the furniture.
2.
Make a hole for the air outlet on the bottom and the top of the furniture.
3.
Fix the air outlet on the hood. Fix the appliance with the 6 screws on the furniture.
4.
Connect the air outlet and the air escape ( top hole) of the furniture with an
exhaust hose
4
.
5.
If you do not install an exhaust hose connection ( bottom hole → top hole of the
furniture), you must not block the holes. Clean the interior of the furniture
regularly.
6.
Fix the adjustment device on the bottom of the appliance to close the gap.
7.
Extraction mode only: Make a hole at the relevant position in the top and the
bottom of the furniture. Install the exhaust pipe and lead it to a suitable exhaust
air duct or outside.
3
Optionally available.
4
Optionally available.
