19
2.
Now connect the exhaust hose to the air-outlet opening
of the hood. Put the widened end of the exhaust hose
over the air-outlet. Start at the back of the air-outlet then
proceed from inside the exhaust hose by installing it (use
your thumbs) on the air-outlet.
3.
Place the suspension device on the wall. Select the position relevant to the dimensions of the
entire appliance. Mark the drillings with a pencil before.
4.
Drill the holes and fix the suspension
device with the screws and dowels.
5.
Hang the hood on the fixed suspension
device.
6.
Install the flat bar on the bottom chimney first, then on the wall. You can carry out this step
provisionally to mark the drillings of the wall mounting and drill the relevant holes.
Wall
Chimney
Chimney
7.
Place the top and bottom chimney on the hood and fix the bottom one on it (look at the
drawing connect chimney to hood).
8.
Fix the chimney-installation bracket below the ceiling on the wall using the screws and
dowels.
Screw chimney ↔
bracket
Screw chimney ↔ bracket
