26
The Alert Items are shown below.
Item
Description
Alarm Time
Configures the time to alert.
(Only
Lamp Time Alarm
and
Filter Time Alarm
.)
SNMP Trap
Click the
[Enable]
check box to enable SNMP Trap alerts.
Send Mail
Click the
[Enable]
check box to enable e-mail alerts.
(Except
Cold Start
and
Authentication Failure
.)
Mail Subject
Configures the subject line of the e-mail to be sent.
The length of the subject line can be up to 100 alphanumeric
characters.
(Except
Cold Start
and
Authentication Failure
.)
Mail Text
Configures the text of the e-mail to be sent.
The length of the text can be up to 1024 alphanumeric
characters, but if you are using some of special characters
below the length may be shorter.
Special characters " ' : & , % \ and space
(Except
Cold Start
and
Authentication Failure
.)
Click the
[Apply]
button to save the settings.
• The trigger of
Filter Error
e-mail is depending on the FILTER
MESSAGE setting in the SERVICE item of the OPTION menu which defines
the period until the filter message is displayed on the projector screen. An
e-mail will be sent when the usage time of the filter exceeds the time limit that is
set. No notification e-mail will be sent if the FILTER MESSAGE is set to TURN
OFF. (
OPTION menu
in the
Operating Guide
)
•
Lamp Time Alarm
is defined as a threshold for e-mail notification (reminder)
of the lamp time. When the lamp hour exceeds this threshold that is configured
through the Web page, the e-mail will be sent out.
•
Filter Time Alarm
is defined as a threshold for e-mail notification (reminder)
of the filter time. When the filter hour exceeds this threshold that is configured
in the Web page, the e-mail will be sent out.
NOTE
3.1 Projector Web Control - Alert Settings (continued)
3. Web Control
