PIZZA GROUP ENTRY MAX 12, Инструкция по эксплуатации

Страница: 31 / 88

- 31 -
5 ALARM AND POSSIBLE FAULTS
WORKING ANOMALIES
Anomalies Possible Causes Solutions
The oven does not heat even though the
temperatures are set correctly.
The pilot lights are off.
Main switch in position “0”
Turn the main
switch in position
“1”
The oven doesn't heat despite the main
switch is on (position 1) and the
temperatures are correctly set. The
function pilot lights of the heating
elements are off.
No electric Energy in the net
Check the general
contactor, the
socket, the plug,
and the supply
cable.
The analogical thermometer doesn't
notice the increase of the temperature
despite the heating elements are
correctly functioning
Analogical thermometer defect
Check and if
necessary replace
the thermometer
Inner light bulb does not switch on Burned inner light bulb
Replace inner light
bulb
Inner light bulb does not switch on Inner light bulb switch defected
Replace light bulb
switch
Inner light bulb does not switch on
No electric supply power on the
light bulb
Check electric
connection with the
light bulb
The door is closed, but fume comes out Exhauster butterfly valve closed
Open more the
valve and check the
right functioning.
The baking chamber does not heat
suitably
The set temperature are too low
Set the right
temperature
The baking chamber does not heat
suitably in spite of the temperature
being set rightly
One or more heating elements
are defected
Replace the
defecate heating
elements
The temperature continues going up
over the set by thermostats
Thermostat probe or thermostat
contacts defected
Check and if
necessary replace
the thermostat/s
The door does not keep right closed
The door closing spring has
subsiding
disassemble the left
side panel and
replace the spring