User manual - TCT101-1ABC
- 25
Notes / Updates
1. In PWM mode, the only option available on parameters 16
Fo .S.1
and 17
Fo .S. 2
for format of Set1 and Set2 is
SSSS
(seconds). Low and upper limits for Set1 (related to percentage
of work or Duty Cycle) are allowed in the range 0..100 (%).
2. In this timer mode, if P-06 Active State Input 1 = Rising Edge
or P-09 Function Input 1 = Disable, at the end of the count
(reaching the set), the timer automatically goes to STOP.
3. his function does not reset the timer value, therefore requires
an input for reset.
4. This function resets the timer at STOP command.
5. This function resets the timer at START command.
6. This function is active only if P-06 Active State Input 1 = Rising
Edge
