Pixsys DRR227, Руководство пользователя

Страница: 15 / 56

User manual - DRR227 - 15
F.PH.A.
Fixed Phase angle control
If this mode is active, the regulation is done as per “time control” (
tiME
), but during the
activation it is managed a fixed choking selected on parameter 45
F.P.A.P.
.
8 Configuration
For configuration parameters see par. 10.
Press Display Do
1
SET
for 3 sec.
Display 1 shows
0000
with
the 1st digit flashing, while
display 2 shows
PASS
2
or
Modify the flashing digit
and move to the next one
pressing
SET
Enter password
1234
3
SET
to confirm
Display 1 shows the first
parameter while display 2
shows the value
4
or
Slide up/down through
parameters
5
SET
or
Increase or decrease the
visualized value pressing
SET
and an arrow key
Enter the new data which
will be saved on releasing
the keys. To change another
parameter return to point 4
6
+
togheter
End of configuration para-
meter change.
The controller exits from
programming
8.1 Loading default values
This procedure allows to restore factory settings of the device.
Press Display Do
1
SET
for 3 sec
Display 1 shows
0000
with
the 1st digit flashing, while
display 2 shows
PASS
2
or
Modify the flashing digit
and move to the next one
pressing
SET
Enter password
9999
3
SET
to confirm
The device loads default
settings
Turn off and restart the
device