3
Sets the base DMX address from which the control channels will begin.
Shows the main processor software revision. No changes are possible within
this option.
Shows the display controller software revision. No changes are possible within
this option.
Selects the primary internal chase effect. See
Chase effects
for descriptions.
Select
mode
>
ef m
to show the selected chase.
Selects the cross fade speed between the steps of the selected
c1
chase effect.
Selects the speed of the selected
c1
chase effect.
Selects the master intensity level of chase effects
c1
and
c2
.
Selects the secondary internal chase effect. See
Chase effects
for descriptions.
Select
mode
>
ef m
to show the selected chase.
Selects the cross fade speed between the steps of the selected
c2
chase effect.
Selects the speed of the selected
c2
chase effect.
Sets the red intensity. Select
mode
>
manu
(manual) to show the result.
Sets the amber intensity. Select
mode
>
manu
(manual) to show the result.
Sets the blue intensity. Select
mode
>
manu
(manual) to show the result.
Sets the green intensity. Select
mode
>
manu
(manual) to show the result.
(Affects
DMX
mode only) Determines how DMX channels are assigned to colours.
Options are
3CH
(red & amber combined),
4CH
&
16bT
(do not use).
Determines whether this fixture will act as a master controlling others.
When controlled by DMX input, this fixture must be set to
slav
.
Affects
dmx
mode only. When set
on
this enables the master intensity channel for
dmx
mode.
Determines the intensity of the four digit control panel display.
Values range from 0 (dimmest) to 15 (brightest).
When set to
Aoff
, the control panel display will blank out shortly
after the menu is exited. The DMX signal indications will remain active.
RGB control using three DMX channels.
mint
set to
on
provides a master intensity.
No chase effects are selectable.
Displays the resulting RGB levels that are set via the
man
section of the internal
menu. External DMX control is not possible in this mode.
Displays the chase effect(s) determined within the
prog
section. External DMX
control is not possible in this mode.
DMX Ch1 to 4: RGBA, Ch5 to 7:
c1
Effect, Speed & Xfade,
Ch8 to 10:
c2
Effect, Speed & Xfade, Ch11: Master intensity.
Menu contents
