12
5. Connect HDBT Receiver
Connect HDBT OUT of the device to HDBT IN of an HDBT receiver
(such as PF-UHK100H-RX) with a Cat 5e/6/7 cable.
6. Connect AUDIO OUT
Connect an audio receiver (e.g. an amplifier) to the AUDIO OUT (1&2).
7. Connect for additional control options:
•
LAN control (Telnet/Web UI): Connect a Local Area Network to the
LAN port.
•
ETHERNET pass through: Connect an active Area Network/PC to the
ETHERNET port, connect a PC/Local Area Network to the Ethernet
port of HDBT transmitter or receiver connected with the switcher, the
PC can be connected to the Area Network.
•
USB control: Connect USB host devices to the USB HOST 1 or 2 port,
Connect USB devices to USB DEVICE ports, by default, when HDMI
OUT port select HDMI IN 1 or 2 as the source input, the USB devices
can be connected to corresponding USB host devices.
Note:
The two USB HOST ports can be configured to bind with other
inputs (Except for HDBT IN) through API commands and Web UI.
•
RS232 Control: Connect a control PC to RS232 control port of the
device.
•
RS232 pass-through: Connect a RS232 enabled device to RS232
port of the device for HDBT IN (1&2) or HDBT OUT, and connect a
RS232 enabled device to the connected transmitter or receiver for
bi-directional RS232 pass-through.
•
IR pass-through: Connect an IR Emitter to IR OUT port of the device/
connected HDBT transmitter/connected HDBT receiver. Connect an
IR Receiver to IR IN port of the connected HDBT
transmitter/connected HDBT receiver/the device for bi-directional IR
pass-through.
8. Connect the AC power cord provided to the switcher.
Содержание PF-MS82T
Страница 1: ...4K 60 8x2 Presentation Switcher w HDBaseT KVM PF MS82T USER MANUAL ...
Страница 27: ...26 HOST USB Bind This section allows to configured to bind with other inputs Except for HDBT IN ...
Страница 32: ...31 Firmware Version This section allows you to obtain information of the current firmware in use ...