Pixelfly NEX-MC10, Быстрый старт

Страница: 5 / 8

5
No. Name Description
LED flickers as the device is connected to a
network.
1 x LAN2 (C):
Connects to a third-party controller for controlling,
configuring and managing the device, encoders
and decoders through LAN control (Web GUI &
Telnet).
Default Protocol
IP Address 192.168.11.24
3
Subnet mask 255.255.0.0
Gateway 192.168.11.1
DHCP Off
Link speed
and duplex Auto detected
Ethernet port indicators : same as above.
Note:
•
Only LAN1 (AV/POE) port supports PoE.
You can connect it to a PoE switch to
receive power, eliminating the need for a
nearby power outlet.
•
We would recommend that you power this
device using either a power adapter or a
PoE switch instead of using both them at the
same time. For example, if you want to use
a power adapter, ensure that PoE function of
the connected LAN port in the switch is
disabled or a non-PoE switch is used.
2 RS-232
Left (DEBUG): Pins TX, RX, G are used for
device troubleshooting only.
RS232 Parameters
Baud Rate 115 200 bps
Data Bits 8 bits
Parity None
Stop Bits 1
Middle (Control) : Pins G, RX, TX are used for
controlling, configuring and managing this device,