Pixel Magic Plasma Enhancer PE1000 Pro, Руководство по эксплуатации продукта

Страница: 24 / 28

Troubleshooting
Important
Information
LED is not displayed properly (including power)
z
Check that the unit is connected to a working mains supply, and that it is
switched on.
No picture is displayed on your display device
z
Ensure both your Plasma Enhancer
®
and display device are switched ON.
z
It may take up to 30 seconds for Plasma Enhancer
®
to complete the
initialization process before a video can be displayed.
z
Ensure your display device is properly connected to Plasma Enhancer
®
and correct video input is selected from your display device.
z
Press MENU button from the remote controls and check whether the OSD
menu can be displayed properly on your display device.
z
Check whether the resolution is set to match your display device. Refer to
section 2, DISPLAY SETUP for more information.
z
Ensure your AV device is properly connected to Plasma Enhancer
®
and
the relative video input has been selected from your Plasma Enhancer
®
.
z
Ensure the video source is of correct format.
Picture is displayed but is unstable
z
Check cabling, particularly that the cable providing video sync is
connected correctly.
Picture appears to be stretched
z
Ensure that the aspect ratio of the video source material, aspect ratio of
your display device, and display resolution are all correctly set.