Pixel Magic Plasma Enhancer PE1000 Pro, Руководство по эксплуатации продукта

Страница: 14 / 28

Hardware Installation
Installation
AV Device Connection
Plasma Enhancer comprises a comprehensive set of input terminals that allow
you to connect to a wide range of audio video devices.
®
Follow the below steps to install:
1
Preparation:
List all AV devices that you wish to connect to Plasma
Enhancer
®
for outputting processed video.
2
Allocation:
Decide which input terminals of your Plasma Enhancer
®
to use for your AV device(s), and set aside high quality terminals to
this source(s) (e.g. DVD player with SDI output should be connected
to SDI terminal). Make sure all required cables are available.
3
Connection:
Ensure all devices are powered
OFF
; connect the AV
device(s) to your Plasma Enhancer
®
with the appropriate terminals
and cables.
4
Setup:
Switch ON your Plasma Enhancer
®
, AV device(s) and display
device(s). Set up your Plasma Enhancer
®
according to the next
section, Basic System Setup.
Decide which video inputs to
use for your AV device(s):
(Best
quality first)
1 Serial Digital Interface (SDI)
input x
1 (Standard)
2 HDMI
(HDCP, video only) inputs x2
for HDTV passthrough
3
HDTV analog input via
VGA
(DB15
connector) x 1
4 AV1
: Component x 1, S-Video x 1,
Composite x 1 with stereo audio x 1
5 AV2
:
SCART
input x 1 (configurable
as RGBS, Component, or S-Video or
Composite) with stereo audio x 1
6 AV3
on front panel: S-Video x 1,
Composite x 1 with stereo audio x 1
Tips:
It is recommended that you
choose the interlaced output from
your AV devices, instead of
progressive (e.g. 480i instead of
480p). This leaves the conversion
from interlaced video to
progressive video to be performed
by
Plasma Enhancer
®
, which has
sophisticated processing
dedicated to this task.
HDMI x 2
Analog VGA SDI
AV1: Component /
S-Video / Composite
VCR /
DVD Player
Analog HDTV
So C urce / P
DVD Player with
SDI Output
Digital HDTV
Sources in HDMI
VCR /
DVD Player
AV2: SCART