(1)
(2)
1
2
3
Loading and Unloading the Battery
1. Unloading(1)
Long press the battery remove button and push right the battery to unload
it.
2. Loading(2)
Insert the lithium battery according to the direction, push in until it is
locked.
Installation and Disassembly of the Controller
1.Loosening the lock ring
Rotate anticlockwise to loosen the lock ring.
Cautions
1. Do not short circuit.
2. Do not expose to rain or immerse into water. This battery is not water
proof.
3. Keep out of reach of children.
4. No over 24 hours' continuous charging.
5. Store in dry, cool, ventilated places.
6. Do not put aside or into fire.
7. Dead batteries should be disposed according to local regulations.
8. If the battery had ceased using for over 3 months, please make a full
recharge.
9. Please charge the battery to approx. 60% before being placed for long
time.
10. Please replace a new battery after charging-and-discharging over 500
times or being used over 3 years.
2. Installing the controller
Slide the hotshoe to completely insert it into the camera’s socket.
3. Securing the lock ring
Rotate clockwise to secure the
lock ring.
Installation and Disassembly of the ring flash
1. Installing the lens adapter ring
Rotate clockwise the proper adapter ring and mount it to the front of the
lens.
Tips:
There are 8 adapter rings
applicable to
MACRO MF-R76
:
49mm, 52mm,
55mm, 58mm,
62mm, 67mm, 72mm and 77mm.
-
0
5 -
-
0
6 -
