Troubleshooting Help
What the lights indicate
How to tell if the IDU is not powered or is not detecting ODU
How to tell if the ODU is receiving a weak signal
Removal Instructions
Slide the end of the
removal tool under the
rails, starting at the
bottom.
Work your way up the rails
from the bottom or side.
When you have loosened the
adhesive enough you can
carefully remove it by hand.
Use WD40 and the rough
side of a sponge to clean
any remaining adhesive
off your window.
Note: The light will blink red upon startup or reset before changing to indicate signal status.
