3
The X2-M5 can be installed on either the left or right.Only carry out the following instructions on the side being used.
①
Remove the standard tachometer
Remove the screw from the hole at the
back of the tachometer.
*Put the bolt store in a safe place.
L i n e u p t h e s c r e w h o l e s o n t h e
original tachometer with the screw
holes on the meter hood and lightly
fasten with the double-sided tape.
*Do not press to strongly on the tape;
it may become difficult to remove.
When installing the 52X-BW please
m a ke ad j u s t m e nt s to l i n e u p t h e
meters on each side.
Unscrew the two screws (torque screw T30 x 2) from the base at the back of the tachom-
eter and remove it by pulling it forward. (As the wiring for the tachometer is connected to
inside the steering column it cannot be removed. Carry out all operations with the wiring
pulled out but connected.)
*Make sure not to lose any removed parts.
Affix the supplied meter hood to the back
of the standard tachometer.
Remove
②
Unscrew the screws at the
back of the tachometer
⑥
Return the tachometer
to its original position
Return the tachometer to its original
place by going in the reverse order
from
①
above, and securely fasten
with the two screws.
Tachometer
(Backside)
Two screws
(torque screw
T30 x 2)
Cable
Cable
Cable
Installing without
removing tachometer
Tachometer
(Backside)
Hole
Two screws
①
Locate the Diagnostic Monitoring
Connector Position
①
Remove the Cover of the Fuse Box
④
Lightly Fasten the Meter
Hood
A f f i x t h e p r ov i d e d d o u b l e - s i d e d t a p e
(round) to the two places as shown in the
figure to the right.
③
Affix Double-sided Tape to
the Stay on the Meter Hood
U s e t h e p r o v i d e d t a p s c r e w s t o
fasten.
Meter Hood (Backside)
Tachometer (Backside)
Tap screw
(included)
⑤
Fix the meter hood with
the screws
⑦
Fasten the meter to the
meter hood
Affix the provided cushion tape to
two places on the sides of the meter.
Pull the meter cable through the hole
at the back of the meter hood and
insert it into the 5-pin connector at
the back of the meter. After having
decided the angle press the meter
into the hood at finish the installation.
Double-sided Tape
(round)
Diagnostic Monitoring
Connector
Diagnostic Monitoring
Connector
Diagnostic Monitoring
Connector
Diagnostic Monitoring
Connector
Diagnostic Monitoring
Connector
Diagnostic Monitoring
Connector
Open
Open
Open
Cover
Cover
Cover
②
Open the Cover
③
Completely insert the OBD
Connector
②
Insert the Fuse
Fuse Box
Fuse Box
Fuse Box
Cover
Remove the fuse for IGN (12 V with key
switch ON), and insert the 7.5 A mini-
fuse from the fuse power cable.
Use a flathead screwdriver or such tool to remove
the cover of the fuse box found on the side of the
panel to the right of the steering wheel.
Connecting the OBD Connector
2
Fastening The Meter
3
Connecting to a Power Source
1
The following is just one example of wiring to the fuse box of a BMW MINI COOPER S MF16S (steering
wheel on right). If your model is different and you are unsure of how to connect please contact your dealer.
I GN
(Not as normal power source)
Cut
Fuse
= Cut connector
(or soldering)
If you are unable to get power from the fuse
box, please wire directly to IGN (12V with
key in ON position). *Do not connect the red
wire coming from the OBD connector.
Server
Meter
Insert the OBD connec-
t o r t o t h e d i a g n o s t i c
m o n i to r i n g c o n n e c to r
from the server.
1-pin Connector
Meter Hood
(Backside)
If you wish to use this product in combination with products in our 3-drive Series (FLAT or COMPACT), PROGAUGE , the “OBD2
Wiring Kit OBD-EH” (sold separately ¥3,200) makes installation a snap.
For more details about using combinations of products see here.
http://pivotjp.com/obd-e/
*When using the
this product with products mentioned above, they can only be used together in compatible model vehicles for both products.
About Using
OBD Products
in Combination
Cushion tape (two places)
Meter Hood
Meter Cable
(Front of the fuse box)
Position = 4th column from the left
and 5th row from the top
Number = 32 or 34
Capacity = 7.5A
Ex: BMW MINI COOPER S MF16S (steering wheel on right, 2008 MODEL)
*If you wish to get power from a fuse
other than the 7.5A mini-fuse, please
purchase separately.
[ Reference 1 ]
Fuse
(included)
Fuse
(included)
Fuse
(included)
