www.pivotcycles.com
1.877.857.4868
11
FAZUA SOFTWARE
Update System Software
NOTE: A detailed video outlining the procedure for updating the system software can be found on the Fazua website:
https://fazua.com/en/magazine/update-motor-software-toolbox/
1. Open the Fazua Toolbox software and connect the drivepack.
(Procedure provided above)
2. Go to
https://fazua.com/en/drive-system/software/
and click on the "Drive System Software" link.
3. On the next page, under the "Latest Version" header, click the "Download" link. Note where this file is saved.
4. In the Fazua Toolbox software, at the bottom of the left panel, click on the "Software Update" menu.
5. In the "Software Update" menu, click on "Select Software" in the upper right hand corner. This will open a
document search menu.
6. In this menu, search for and open the recently downloaded "Drive System Software" file.
7. Click "Update"
8. Do not move the drivepack during the update process. Gently hold the drivepack in place, as possible
vibrations during calibration can move the drivepack.
9. Wait for the update to install and the motor calibration to complete.
10. Disconnect the USB cable and install the USB cap using a Torx T10 screwdriver. (Maximum Torque: 1.5 Nm)
11. Once you install the drivepack with the new motor software into the ebike, the remote will recieve an
update. The LEDs will flash during this process.
Saving Custom Assistance Profiles
Once a custom configuration is created, click on "New", give the profile a name and click on "Save". All the
profiles you have saved can be called up in the drop-down menu, even if the drivepack is not connected
to the computer. The various profiles are saved to the Fazua Toolbox software and will be available in the
drop-down menu everytime the program is opened.
Setting Custom Assistance Profiles
To transfer the custom settings to the drivepack, click the "Set Values" button at the top of the screen.
Importing Custom Assistance Profiles
To import a profile, click on "Import". In the menu that appears, navigate to the location that the file is saved.
Select the file and click on "Open". The next menu will have all profiles saved in that file appear with check
marks next to each. Select which profiles to import and click on "Import". All selected profiles to import will
now appear in the drop-down menu in the Fazua Toolbox.
Exporting Custom Assistance Profiles
NOTE: Saved profiles are saved to the Fazua Toolbox and are always available when the desktop software is opened.
The main reason to export a profile, would be to to send a custom profile to another user. This allows profiles to
be shared and uploaded to another user's device.
Once a custom configuration has been saved to the Fazua Toolbox, it is available to be exported. To export
a profile, click on "Export". In the menu that appears, select which profiles to export and click "Export".
All profiles selected will be saved collectively as a set within a single .XML file. In the next menu, give the
profile set a name and click "Save". The saved file contains all profiles that were selected and enables them
to be imported individually or as a group.
