Use and maintenance manual
Bulletin M0399
EN
26
/48
123,5
Res Tot L
1000
Total L 113243
Driver Code?
Driver Key?
STAND-BY
NOTES AND INSTRUCTIONS
STAND-BY
with successive
enable signals or individual signals
depending on the selections
made by the administrator in the
configuration stage
First line
: unit of measurement of
partial total shown on the large-size
upper display
l – litres
qt – US quarts
pt – US pints
gl – US gallons
Second line
: unit of measurement of
total (resettable or NON resettable)
shown alongside The unit of
measurement is gallons for cases of
partial totals in US gallons, quarts
and pints, while it is litres for partial
totals in litres
last dispensing operation
the 2 pages appear in succession in
flashing mode
11.4
Electronic controller configuration
The system is designed to be highly flexible and
configurable
The configuration functions and parameters are all present
in the PC software Refer to the software manual for
further details A reduced number of information items and
possible configurations remain on the controller, as can be
seen from the user interface on the display
The PIN code required to open the manager menu can
be changed via software by the administrator The default
factory code is 123456
For a correct operation of the system, date and time of
the panel must be preset; then, using the i-button panel or
placing the manager key on the player, carry out an "export config"
Later on, connecting the manager key to the computer, the panel will be recognised, imported
in the system and will be configurable
For further information, see the manual of the
SSM 1.5
software
Whenever a modification is
made inside the Manager
Menu, before exporting any
configuration from the panel
on i-Button, exit the menu, so
that the controller can save
the new settings
NOTE
