Piusi MC BOX 1.5 ETL Скачать руководство пользователя

Страница: 11 / 48

1111

/48

This manual is the property of PIUSI S.p.A. Any reproduction, even partial, is forbidden.

BOX

1.5 ETL

Translated from Italian

The quantity of fuel that can be dispensed is configured via software and it can be:

◊ free without PRESET;

◊ with PRESET.

Choosing preselection mode (PRESET), the operation is the following:

◊ supply of a quantity preset by the manager (PANEL PRESET), that can be changed by

the driver as well.

The bidirectional transfer of data such as setting, database and supplies can be done with a new

generation manager key only
The panel is easy to install and adequately protected The electrical connections are easily

accessible The unit can be supplied complete with flow meter to be installed in line with the pump

Construction

characteristics

Performance

Optional

¦ Panel with double display, keypad and i-button key reader;

¦ openable metal enclosure for easy access to electrical connections;

¦ max current 6.5 Amps.
¦ Additional i-button keys for users and manager;

¦ high precision oval gear electronic flow meter.
¦ Can manage up to 60/120 users (depending on software version);

¦ facility to calculate consumption/period for each user;

¦ local memory up to the last 650 fluid dispensing operations;

¦ dispensing date and time management;

¦ interfaceable with

SELF SERVICE MANAGEMENT 1.5

ERP software.

Do not operate the system for any purpose other than the purpose described within this manual; all

other use is considered "IMPROPER" and will result in Piusi SpA disclaiming any responsibility for

damage to property, people, animals or to the system itself
PLANT OPERATION RESTRICTIONS:

¦ it is forbidden to use the appliance in a construction configuration other than that contemplated by

the manufacturer;

¦ it is forbidden to use the appliance with fixed guards tampered with or removed;

¦ it is forbidden to integrate other systems and/or equipment not considered by the manufacturer;

¦ it is forbidden to connect the appliance up to energy sources other than those contemplated by the

manufacturer;

¦ it is forbidden to use the commercial devices for purposes other than those indicated in this manual

¦ do not use in case of lightnings

WARNING

Содержание MC BOX 1.5 ETL

















































Результаты поиска

Содержание MC BOX 1.5 ETL

Отзывы:

Похожие инструкции для MC BOX 1.5 ETL

Бренды по названию

Популярные бренды

Piusi MC BOX 1.5 ETL, Руководство по эксплуатации и обслуживанию

Результаты поиска

Содержание MC BOX 1.5 ETL

Отзывы:

Похожие инструкции для MC BOX 1.5 ETL

Бренды по названию

Популярные бренды