Piusi K33 Atex, Руководство пользователя

Страница: 26 / 32

26 M0217 EN
EN
M EVERY DAY USE
ATTENTION THE WORKING OPERATIONS MUST ALWAYS BE
GUARDED BY THE OPERATOR.
Should any sealants be used on the suction and
delivery circuit of the pump, make sure that these
products are not released inside the meter.
Foreign bodies in the suction and delivery circuit of
the pump could cause malfunctioning and break-
age of themeter components.
While dispensing, do not inhale the pumped prod-
uct
IF ANY TREATED FLUID LEAKS OUT DURING DIS-
PENSING, TAKE ALL STEPS NECESSARY TO ENSURE
THE LEAKED FLUID IS CLEANED UP AND SAFE AS
SPECIFIED ON THE PRODUCT TECHNICAL SHEET.
USE
After installation and calibration K33 ATEX is ready to
work. Turn the reset knob (see diagram 1,pos. “12”)
(clockwise if it is mounted on the left of the meter and
anticlockwiseif it is mounted on the right) until the batch
register is completely reset. The totaliser cannot be reset
in any way. Make sure that during use pressure does not
exceed the value indicated insection “Technical data”.
USE BY GRAVITY K33 ATEX can also be used in fuel units which are not
equipped with pump sand where the flow is generated
CZUIFEJòFSFODFJOGVFMMFWFMCFUXFFOUIFUBOLBOEUIF
nozzle outlet. As a reference, a system composed ofa
UBOL Pò UIF HSPVOE XJUI UIF NFUFS JOTUBMMFE SJHIU BU
the bottom of the tank,a 3-m long 1’’ flexible pipe and
a manual nozzle type Self 2000, guarantees aflow rate of
BQQSPYJNBUFMZMJUSFTNJOVUFJGUIFEJòFSFODFJOMFWFMJT
higherthan 1.5 metres. Longer pipes or nozzles produc-
ing higher pressure losses reduce the flowin respect to
UIFFYJTUJOHEJòFSFODFJOMFWFM6TFCZHSBWJUZJTOPUSFD
-
PNNFOEFEXJUIEJòFSFODFTJOMFWFMMPXFSUIBONFUSF
as the consequent reduced flowrate causes the meter
to work outside its guaranteed accuracy range. On field
calibration is always advisable in case of gravity installa-
tions.