Page 4
For technical questions, please call 1‑800‑444‑3353.
SKU 67801
starts emitting a steady tone when
it detects the edge of a live wire.
When that happens, mark the spot
over the top center of the detector.
6. Place the unit on the wall
a few inches to the right of
where it detected the live wire.
Then move it slowly from right
to left, horizontally across the
wall and mark the spot when Volt
detects again. Between the two
spots is the live wire’s position.
7. Repeat the process to confirm
position of live wires.
8.
WARNING! TO PREVENT
SERIOUS INJURY AND DEATH
FROM ACCIDENTAL SHOCK:
Turn off all circuits within
the wall after detection and
before working on the wall.
Battery Replacement
Before first use or if Low Battery LED
lights up, then replace the batteries:
1. Open battery door on back of case.
2. Connect a 9‑volt battery
to battery clip.
3. Insert battery into case and
replace battery door.
Record Serial Number Here:
Note:
If product has no serial
number, record month and
year of purchase instead.
Note:
Replacement parts are
not available for this item.
