Page 5
For technical questions, please call 1-888-866-5797.
Item 62117
Lifting
Park vehicle on a flat, level, solid, surface safely away from oncoming traffic. Turn off the vehicle’s
engine. Place the vehicle’s transmission in “PARK” (if automatic) or in its lowest gear (if manual).
Set the vehicle’s emergency brake. Then, chock the wheels that are not being lifted.
1. Put the Handle on the Release Valve and turn the
Handle counterclockwise to lower the Jack.
Once the Jack is fully lowered, turn
the Handle firmly clockwise.
2. Put the Handle in the Handle Socket and
carefully position the Saddle of the Jack under
the vehicle manufacturer’s recommended lifting
point. (See vehicle manufacturer’s owner’s
manual for location of frame lifting point.)
3. Pump the Handle until the top of the Jack’s Saddle
has nearly reached the vehicle lifting point. Position
the Saddle directly under the vehicle’s lifting point.
4. To lift the vehicle, pump the Handle.
Use smooth, full strokes.
5. Select matching jack stands (sold separately)
of appropriate capacity. Set the jack
stands to the same height according to
the manufacturer’s instructions, making
sure they lock securely into position.
6. Position the jack stands’ saddles under the vehicle
manufacturer’s recommended support points.
WARNING!
Ensure that the vehicle support
points are fully seated in the saddles of both
jack stands. Use a matched pair of jack stands
per vehicle to support one end only.
7. Place the slotted end of the Handle over the
Release Valve and slowly turn the Handle
counterclockwise to lower the vehicle onto
the saddle(s) of the jack stand(s). Then, turn
the Handle firmly clockwise to close it.
8. Once the vehicle is fully seated on the
jack stands, continue slowly lowering the
Jack until it is completely lowered.
9. Remove the Jack and store safely out of the way.
Lowering
1. Carefully remove all tools, parts, etc., from under
the vehicle.
2. Put the Handle in the Handle Socket and
position the Saddle under the lifting point.
Turn the Handle firmly clockwise and pump
to raise load high enough to clear the jack
stands, then carefully remove jack stands.
3. Put the Handle on the Release Valve and
slowly turn the Handle counterclockwise
to lower the vehicle onto the ground.
4. Lower the Jack completely. Then, store in a
safe, dry location out of reach of children.
Содержание 62117
Страница 1: ......
