Page 4
For technical questions, please call 1-888-866-5797.
Item 62117
Setup and Operation
Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this
manual including all text under subheadings therein before set up or use of this product.
Attaching the Handle
1. Insert the Handle into the Handle Socket.
Bleeding
1. Remove Cover Plate and Fill Plug.
2. Place the slotted end of the Jack Handle
over the Release Valve, and then turn
counterclockwise to open the valve.
3. Check fluid level and, if necessary, top off
according to Adding Hydraulic Fluid below.
4. Turn the Handle clockwise to close the Valve,
and then pump the Handle up and down quickly
several times to purge air from system.
5. Replace Fill Plug and Cover Plate.
IMPORTANT:
After bleeding the Jack, test the
Jack for proper operation prior to its actual use.
6. If, after bleeding, the Jack does not appear
to be working properly, do not use it until
repaired by a qualified service technician.
Adding Hydraulic Fluid
1. Remove Cover Plate and Fill Plug.
2. Add high grade hydraulic fluid (sold
separately)
slowly until the fluid reaches 1/4″
below the top of the Fill Port.
Note:
Do not touch the Handle
when adding hydraulic fluid.
3. Replace Fill Plug and Cover Plate.
Содержание 62117
Страница 1: ......
