background image

Page 2

For technical questions, please call 1-800-444-3353.

Items 60344-47

          

SAFET

y

Op
ERA
TION

INS

pE

c

TION

INST
ALLA

TION

Table of contents

Safety ......................................................... 2
Specifications ............................................. 5
Installation .................................................. 5
Operation .................................................... 6

Inspection ................................................... 8
Parts Lists and Diagrams .......................... 10
Warranty .................................................... 12

WARNING SyMBOLS AND DEFINITIONS

This is the safety alert symbol.  It is used to alert you to potential personal injury hazards.  

Obey all safety messages that follow this symbol to avoid possible injury or death.

Indicates a hazardous situation which, if not avoided, 

will result in death or serious injury.

Indicates a hazardous situation which, if not avoided, 

could result in death or serious injury.

Indicates a hazardous situation which, if not avoided, 

could result in minor or moderate injury.

Addresses practices not related to personal injury.

IMpORTANT SAFETy INFORMATION

TO pREVENT SERIOUS INJURy

REVENT SERIOUS INJUR

REVENT SERIOUS INJUR  AND DEATH:

yy

Basic Safety Information

1.

To Reduce the Risk of Electric Shock or Injury, 

Use Indoors Only.

2.

Do not lift more than rated load.  Be aware of 

dynamic loading!

  Sudden load movement may 

briefly create excess load causing product failure.

3.

Do not operate when load is not 

centered underneath.

4.

Do not operate hoist with twisted, kinked, or 

damaged wire rope.  

Inspect wire rope carefully before every use.

5.

Do not operate a damaged or 

malfunctioning hoist.  

Inspect hoist carefully 

and test operation before every use.

6.

Do not lift people or lift loads over people.

  

Falling loads can injure or kill people.

7.

Do not operate with rope not 

centered in its groove.

8.

Do not remove or cover warning labels and/

or tags.  

These carry important safety information.  

If unreadable or missing, contact 

Harbor Freight Tools for a replacement.

9. WARNING: Handling the cord on this product will 

expose you to lead, a chemical known to the State of 

California to cause cancer, and birth defects or other 

reproductive harm. Wash hands after handling.  

(California Health & Safety Code § 25249.5, 

et seq.

)

10. The warnings, precautions, and instructions 

discussed in this instruction manual cannot 

cover all possible conditions and situations 

that may occur.  It must be understood by the 

operator that common sense and caution are 

factors which cannot be built into this product, 

but must be supplied by the operator.

Содержание 60344-47













Отзывы: