Page 2
For technical questions, please call 1-888-866-5797.
Item 58775
IMPORTANT SAFETY INFORMATION
Read all safety warnings and instructions.
Failure to follow the warnings and instructions may result in serious injury.
Save all warnings and instructions for future reference.
The warnings and precautions discussed in this manual cannot cover all possible conditions and
situations that may occur. It must be understood by the operator that common sense and caution
are factors which cannot be built into this product, but must be supplied by the operator.
Work area
1.
Turn off the engine, set the parking brake, and
chock the tires before working on a vehicle.
2.
Keep the work area clean and well
lighted.
Cluttered benches and dark areas
increase the risk of injury to persons.
3.
Keep bystanders and children away
while operating the tool.
Distractions can
result in loss of control of the tool.
Personal safety
1.
Stay alert. Watch what you are doing and
use common sense when operating the tool.
Do not use the tool while tired or under the
influence of drugs, alcohol, or medication.
A moment of inattention while operating the
tool increases the risk of injury to persons.
2.
Dress properly. Do not wear loose clothing or
jewelry. Contain long hair. Keep hair, clothing, and
gloves away from moving parts.
Loose clothes,
jewelry, or long hair increases the risk of injury to
persons as a result of being caught in moving parts.
3.
Use safety equipment.
Wear ANSI-approved safety
goggles and heavy-duty work gloves during use.
Tool use and care
1.
Do not force the tool.
Use the correct tool for the
application. The correct tool will do the job better
and safer at the rate for which the tool is designed.
2.
Store the tool when it is idle out of reach of
children and other untrained persons.
A tool
is dangerous in the hands of untrained users.
3.
Check for misalignment or binding of moving
parts, breakage of parts, and any other condition
that affects the tool’s operation.
If damaged,
have the tool serviced before using. Many
accidents are caused by poorly maintained tools.
4.
Use only accessories that are identified
by the manufacturer for the specific
tool model.
Use of an accessory not
intended for use with the specific tool model,
increases the risk of injury to persons.
5.
Avoid off-center loads.
If the Pump seems
unusually hard to operate, immediately
stop. Adjust the Ram to eliminate or
diminish an off-center load. The Ram
Toe and Plunger Toe must
only
be used
together to prevent an off-center load.
6.
Protect the Hose.
Do not drop heavy
objects on the Hose. Avoid kinks in the
Hose. Maintain proper clearance to avoid
damage to the Hose and Couplers.
7.
Inspect repair before using vehicle.
Repairs to structural or frame members
must be inspected by a qualified technician
to ensure that the structure is still strong
enough to safely fulfill its function.
Service
1.
Tool service must be performed only
by qualified repair personnel.
2.
When servicing a tool, use only identical
replacement parts. Use only authorized parts.
SAVE THESE INSTRUCTIONS.
