Envelope Module x2
Description
The Envelope is a complex multi-stage envelope generator with voltage controllable rise and fall. Using the sustain switch to toggle
between modes, the Envelope functions as either a 2 stage attack-decay envelope or a 3 stage attack-sustain-release envelope. This
module can perform as a voltage controlled envelope generator, slew (portamento), envelope follower, VCO and LFO, pulse delay, wave
shaper, and more.
Controls
Rise Response Switch – Switch between linear (up), and non-linear (down) response curve for rise.
Rise Control – Adjust the rise portion of the envelope. Left (short response). Right (long response).
Rise CV In Attenuverter - Attenuverter for Rise CV In. Also functions as log/lin/expo response control.
Sustain Switch - Enable (right) or disable (left) envelope sustain.
Fall Response Switch - Switch between linear (up), and non-linear (down) response curve for fall.
Fall Control - Adjust the fall portion of the envelope. Left (short response). Right (long response).
Fall CV In Attenuverter - Attenuverter for Fall CV In. Also functions as log/lin/expo response control.
Cycle Switch - The envelope will retrigger at the end of the fall stage. Creating a cycling envelope or LFO.
Rise CV Input - Rise CV input.
Both CV Input - Joint Rise and Fall CV input.
Fall CV Input - Fall CV input.
In - Main signal input.
EOA Output - Gate signal output. Signal goes high at end of rise.
Trigger Output - Trigger output. Trigger created at end of fall.
Output - Main signal output.
17
