National Instruments | 4600 Patrick Henry Drive, Santa Clara CA 95054 | 408-610-6810 | ni-microwavecomponents.com
© 2014 National Instruments
Document No. 5520035-00 | Rev. B | ECN 001540
QuickSyn Lite QuickStart Guide
This document provides information about hardware and software
installation for the QuickSyn Lite Synthesizer.
QuickSyn Lite QuickStart Guide
This document provides information about hardware and software
installation for the QuickSyn Lite Synthesizer.
Identify contents of box:
Check kit contents
Learn the sweep mode panel
Sweep Mode
The sweep mode panel groups together all controls related to
frequency and power sweep. The user can use the controls on the
sweep mode panel to set triggering, sweep direction, frequency
range and step size, power range and step size, and frequency and
power dwell time.
Learn the list mode panel
Install drivers and software
Download device drivers and Soft Front Panel from ni-microwavecomponents.com and refer to the QuickSyn user manual for instructions on
how to install the drivers and software. Note the user manual is available online.
Letter Description
Order Number
Qty
A
QuickSyn Lite Synthesizer
FSL-0010 or FSL-0020
1
B
CABLE,USB
MFSW-ACC02
1
C
CABLE,DC BIAS
2048118-00
1
QuickSyn Lite Synthesizers employ the same revolutionary
phase-refi ning QuickSyn technology as the full-featured
QuickSyn Synthesizers, enabling wide coverage (0.65 to 10 or
20 GHz), fi ne resolution (1 Hz resolution), fast frequency
switching (100 μs), and instrument-grade spectral purity.
This document will guide you through the simple process of
setting up your QuickSyn Lite Synthesizer. A complete user
manual is available online (ni-microwavecomponents.com)
along with device drivers and software.
NOTE:
We recently changed the branding of the QuickSyn product
line by replacing the Phase Matrix logo with the National
Instruments logo. In some cases, as we deplete our stock, you
may observe the Phase Matrix logo on packaging, software,
manuals, and the unit itself.
QuickSyn Lite Synthesizers
List Mode
The list mode panel groups together all of the controls related to
setting up and executing triggered sequences of synthesizer states.
(This cable is for functional test purposes only)
