Page 3
For technical questions, please call 1‑800‑444‑3353.
SKU 95987
Remove the Bearing Puller and gently
tap the bearing with a rubber mallet
until it is even, then start again.
7. Repeat steps 4 thru 6 until bearing has
successfully pulled free of its location.
8. Close the Attachment clamps by
twisting Handle counterclockwise.
Then remove the bearing.
Maintenance and Servicing
1.
BEFORE EACH USE,
inspect the
general condition of the Bearing Puller.
Check for loose attachments, binding
of moving parts, cracked or broken
Attachments, and any other condition
that may affect its safe operation. If
any abnormality is found, have the
problem corrected before further use
2.
AFTER EACH USE,
wipe off Bearing
Puller with clean, moist cloth.
3. Lubricate attachments regularly
to ensure smooth operation.
4. Replace attachment if threads begin
wear and will not attach to Slide
Hammer.
Record Serial Number Here:
Note:
If product has no serial
number, record month and
year of purchase instead.
PLEASE READ THE FOLLOWING CAREFULLY
NEITHER THE MANUFACTURER OR DISTRIBUTOR MAKES
ANY REPRESENTATION OR WARRANTY OF ANY KIND TO
THE BUYER THAT HE OR SHE IS QUALIFIED TO MAKE
ANY REPAIRS TO THE PRODUCT, OR THAT HE OR SHE IS
QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT.
IN FACT, THE MANUFACTURER AND/OR DISTRIBUTOR
EXPRESSLY STATES THAT ALL REPAIRS AND PARTS
REPLACEMENTS SHOULD BE UNDERTAKEN BY CERTIFIED
AND LICENSED TECHNICIANS, AND NOT BY THE BUYER.
THE BUYER ASSUMES ALL RISK AND LIABILITY ARISING OUT
OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR
REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS
OR HER INSTALLATION OF REPLACEMENT PARTS THERETO.
Part
Description
Qty
1
Slide Hammer
1
2
Handle
1
3
Attachment 3/8” to 1/2”
1
1
2
3
4
5
6
Parts List and Diagram
