Page 6
For technical questions, please call 1-888-866-5797.
Item 69521
MAINTENANCE AND SERVICING
Procedures not specifically explained in this manual
must be performed only by a qualified technician.
TO PREVENT SERIOUS INJURY FROM STAND FAILURE:
Do not use damaged equipment. Make sure the stand is stable. If any unsafe
conditions are found, take it to a qualified technician for service or repair.
1.
BEFORE EACH USE,
inspect the
general condition of the Stand. Check
it for cracks, bends in the metal, signs
of unusual wear or any other condition
that may affect its safe operation.
If any are found, do not use the Stand.
2. Keep Engine Stand clean and
free of dirt or grease.
3. Before each use, check that
hardware is securely fastened.
4. Check that the Casters are
clean and turn properly.
5.
AFTER USE,
clean external surfaces
of the stand with a clean, moist cloth.
Folding the Stand for Storage
1
2
3
1. Remove the forward R-pin (16).
2. Remove the Leg Lock Pin (15).
3. Fold up the Leg (1/9).
4
3
4. Insert the Leg Lock Pin (15) through
the upper hole in the Base (2) so
that it holds the Leg in place, and
lock it in place with the R-pin.
5. Repeat for the other Leg.
WARNING! TO PREVENT SERIOUS INJURY: Do not use the Stand
while it is folded. This is only for compact storage.
Record Serial Number Here:
Note:
If product has no serial number,
record month and year of purchase instead.
Note:
Some parts are listed and shown
for illustration purposes only, and are not
available individually as replacement parts.
