Page 3
For technical questions, please call 1-888-866-5797.
Item 61382
SAFET
y
Op
ERA
TION
M
AINTENAN
c
E
SETU
p
Air Source
1.
Never connect to an air source that is
capable of exceeding 200 psi.
Over pressurizing the tool may cause
bursting, abnormal operation, breakage
of the tool or serious injury to persons.
Use only clean, dry, regulated compressed air at the
rated pressure or within the rated pressure range as
marked on the tool. Always verify prior to using the
tool that the air source has been adjusted to the rated
air pressure or within the rated air-pressure range.
2.
Never use oxygen, carbon dioxide, combustible
gases or any bottled gas as an air source
for the tool.
Such gases are capable of
explosion and serious injury to persons.
Symbol Definitions
Symbol
property or statement
pSI
Pounds per square inch of pressure
cFM
Cubic Feet per Minute flow
ScFM
Cubic Feet per Minute flow
at standard conditions
NpT
National pipe thread, tapered
Symbol
property or statement
WARNING marking
concerning Risk of Eye Injury.
Wear ANSI-approved eye protection.
WARNING marking concerning Risk of
Hearing Loss. Wear hearing protection.
WARNING marking concerning
Risk of Respiratory Injury. Wear
NIOSH-approved dust mask/respirator.
WARNING marking concerning
Risk of Explosion.
SAVE THESE INSTRUcTIONS.
Содержание 61382
Страница 1: ......
