background image

Page 4

For technical questions, please call 1-800-444-3353.

Item 60805

SAFET

y

Op
ERA
TION

M

AINTENAN

c

E

SETU
p

5. 

Maintain power tools.  check for 

misalignment or binding of moving 

parts, breakage of parts and any other 

condition that may affect the power tool’s 

operation.  If damaged, have the power 

tool repaired before use.  Many accidents 

are caused by poorly maintained power tools.

6. 

Use the power tool, accessories and 

tool bits etc. in accordance with these 

instructions, taking into account the 

working conditions and the work to 

be performed.  Use of the power tool for 

operations different from those intended 

could result in a hazardous situation.

Service

Have your power tool serviced by a qualified repair person using only identical 

replacement parts. 

 

This will ensure that the safety of the power tool is maintained.

Vacuum pump Specific Safety Warnings

1.  Avoid overfilling.  Do not service air 

conditioning systems improperly.

2.  Wear ANSI-approved safety goggles 

during set up and/or use.

3.  Certification is required by law for 

technicians opening refrigeration circuit.

4.  Use in dry locations only.

5.  Do not cover this unit.  This Vacuum 

Pump gets very hot when in use.  Do 

not use near combustibles and allow the 

unit to cool down completely after using, 

and/or before moving or storage.

6.  Maintain labels and nameplates on the tool.   

These carry important safety information.   

If unreadable or missing, contact 

Harbor Freight Tools for a replacement.

7.  Do not leave the tool unattended when 

it is plugged into an electrical outlet.  

Turn off the tool, and unplug it from 

its electrical outlet before leaving.

8.  This product is not a toy.  

Keep it out of reach of children.

9.  WARNING:  The brass components of this 

product contain lead, a chemical known to 

the State of California to cause birth defects 

(or other reproductive harm).  

(California Health & Safety Code 

§ 25249.5, 

et seq.

)

10. WARNING: Handling the cord on this product 

will expose you to lead, a chemical known 

to the State of California to cause cancer, 

and birth defects or other reproductive harm. 

Wash hands after handling.   

(California Health & Safety Code 

§ 25249.5, 

et seq.

)

11. People with pacemakers should 

consult their physician(s) before use.  

Electromagnetic fields in close proximity to 

heart pacemaker could cause pacemaker 

interference or pacemaker failure.  

In addition, people with pacemakers should: 

• Avoid operating alone. 

• Properly maintain and inspect to avoid 

electrical shock. 

• Properly ground power cord.  

Ground Fault Circuit Interrupter (GFCI) 

should also be implemented – it prevents 

sustained electrical shock.

12. The warnings, precautions, and instructions 

discussed in this instruction manual cannot 

cover all possible conditions and situations 

that may occur.  It must be understood by the 

operator that common sense and caution are 

factors which cannot be built into this product, 

but must be supplied by the operator.

 SAVE THESE INSTRUcTIONS.

Содержание 3 CFM two stage













Отзывы: