PITSOS GVC425SP, Руководство пользователя, Страница: 9 / 10

13
ZVC425-002PI_v01
9 Plug in the appliance.
Before operation make sure that the SAFBAG bag is
installed in the vacuum cleaner chamber and that inlet filter
and the EPA outlet filter is installed in the appliance.
11
Switch on the vacuum cleaner by pressing the “on/off”
button (6) .
11 The vacuum cleaner is equipped with electronic power
regulator allowing a stepless regulation of vacuum cleaner
power. The power regulation is performed with a slider.
12
Moving the slider according to its mark (+ or –) will
increase or reduce the suction power.
Filter disassembly
Before changing the filters make sure that the vacuum cleaner
is switched off and unplugged from the mains supply.
INLET FILTER
1 Release the catch of front cover (10) and open it.
2
Remove the SAFBAG dust bag module from the vacuum
cleaner chamber.
3 Put out the cover of inlet filter together with installed inlet
filter from the guide rails located on back wall of vacuum
cleaner chamber.
4
Take out the inlet filter from the inlet filter cover.
5 Put the new filter into inlet filter cover (15) . Pay attention
whether the edges of filter cling closely to the cover of filter.
6
The cover of inlet filter (15) together with installed filter
press home into guide rails to the previous location.
The damaged inlet filter should be replaced
with a new, genuine manufactured product only.
7 Insert the SAFBAG dust bag module to the vacuum
cleaner chamber.
8 Close the cover by pressing it until you hear
a characteristic click – pay attention not to trap the dust bag.
EPA OUTLET FILTER
The vacuum cleaners are equipped with a EPA E11 outlet filter.
1 In order to change the outlet filter EPA pick up the handle
of vacuum cleaner and open the locker for accessories.
2 Press the catch on outlet filter cover, then put out the
outlet filter cover from the vacuum cleaner.
3 Remove the outlet filter EPA cassette, replace the
used cassette with new one. The EPA filter assure circa
1 year of effective usage.
4 Put the filter cover this way that three ledges placed
in lower part of cover hit the gaps in the vacuum cleaner
casing, and the upper ledge is snapped.
●
Close the locker for accessories and move down the
handle.
C
D
SAFBAG dust bag disassembly/assembly
E
Vacuum cleaner is equipped with SAFBAG bag (1 piece).
1 The vacuum cleaner is equipped with safety valve
located in chamber of dust container (bag). It opens
automatically in case of total stopping of suction hose or total
stopping of equipment elements connected thereto, as well
as in case of overfill of dust bag. After opening the valve
one can hear characteristic “whirr” sound inside the vacuum
cleaner.
2
Total covering up of bag loading indicator by the red
cover in case the sucker or the brush is upraised over
the cleaned surface informs, that change of dust bag is
necessary. The bag loading indicator may operate in case
of suction hose stopping or in case of stopping of equipment
elements connected thereto.
3 Switch off the vacuum cleaner by pressing the on/off
button (6) and unplug the appliance.
4
Press the two side buttons on the end of the hose and
remove the hose end from the inlet opening of the vacuum
cleaner.
5
Release the front cover fastening (10) and open the cover.
6 Remove the SAFBAG dust bag module from the vacuum
cleaner chamber (13) .
7
Holding the bag plate deflect the lock, then the bag will
slip out automatically from the handle. Close the SAFBAG
bag cover in order to cover the opening of filled bag. Throw it
out into garbage container.
8 Put the plate of new dust bag towards (the window of)
handle in this way, that the plate will catch the fins, and the
ledge hit the window centrically. Snap the second end of
plate.
●
The SAFBAG bag module together with installed bag
(13) put into the vacuum cleaner container In this way,
that the ledge of SAFBAG bag module hit the slot on
the wall of container. Close the cover pressing it until
you hear the characteristic sound (“click”) – be careful to
avoid slam of the bag.
Do not vacuum without SAFBAG bag module
installed. The lack of SAFBAG bag module
disables to slam the upper cover of vacuum
cleaner.
It is recommended to replace the dust bag if:
a) the red surface on bag loading indicator will appear,
b) the safety valve activates,
c) the vacuum cleaner operates poorly,
d) the dust bag is full.
End of operation cleaning
and maintenance
1 Switch off the vacuum cleaner by pressing the “on/off”
button (6) .
2
Unplug the appliance.
3 Wind the cord by pressing the cord rewind button (2) .
F