Pairing the SONY PS4 DUALSHOCK 4 Gaming Controller
To begin using a PS4 controller with the Tele-Op module, you must pair the PS4 controller to the Bluetooth dongle
connected to the Tele-Op module. To do this:
1. Be sure the Tele-Op module’s Bluetooth dongle is inserted into the USB host port and the PS4 controller’s
battery is fully charged.
2. Power up the module. After three or four seconds, the green LED on the Tele-Op module should be blinking
rapidly.
3. Press and hold down the Share and Power buttons simultaneously on the PS4 controller until the controller’s
light bar begins to blink white rapidly. This indicates that the PS4 controller is now in discovery mode. Release
the buttons.
4. Press the Mode button on the Tele-Op module. The red LED will come on, indicating that the Tele-Op module
is attempting to pair with the PS4 controller that is in discovery mode. When they have successfully paired, the
Tele-Op module’s red LED will turn off and the green LED will be on and solid (not blinking). In addition, the
PS4’s light bar will change to solid green.
Note: You only need to pair the devices once. After they are paired, simply power up the Tele-Op module and then turn
on your PS4 controller by pressing the Power button. The PS4 controller’s light bar will turn white and blink slowly while
it is linking; it will switch to solid green color as soon as they’re linked. It might take up to 10 seconds to link.
