6
Fluid Power Car User Guide 60070 V0113
16. Insert the nylon axle bushings on both sides of each axle hole. Insert
the second axle into the back hole.
17. Insert the small dowel in the hole behind the front wheel. Glue this in
place on only one side of the car body. Place a 1/2" nylon spacer on
each end of the axles.
18. Find the four Part 8s – these are the wheels.
Remove the hubs from the plastic font.
Holding a hub on one side of a wheel, screw
in three of the hub/bearing set screws to hold
them together. Repeat with the other three
hubs and wheels.
Note: For extra traction, carefully stretch the
two big rubber bands over the edges of the
front wheels before attaching them.
19. Carefully press a wheel on each axle end. If the hubs feel loose on the
axle, remove the wheels and insert a small piece of thread through the
hub and reattach.
Steps 16-17
1"
dowel
1/4" x 1/2"
nylon spacers
1/4" x 1/2"
nylon spacers
Axle
bushings
Axle
bushings
Axle
Top view of completed assembly
Side view of
completed assembly
Step 18
Hub
8
