4
Balsa Truss Tester User Guide 60006 V0212
5. Make sure the ends of the truss rest on the span supports,
overlapping the supports at least 1/2 inch on both sides (Figure
5). If needed, use the thumbscrews on the back of the tester
to move the span supports where needed to support the truss
(Figure 6). Retighten the thumbscrews.
6. For triangular trusses, select the proper angle on the angle block
for the truss being tested (Figure 7). For flat trusses, unscrew the
angle block from the tester and replace it with the square block
(Figures 8-10).
Figure 5
Figure 6
Figure 7
Figure 10
Figure 8
Figure 9
Содержание Balsa Truss Tester
Страница 1: ...Balsa TrussTester 60006 V0212 User Guide...
