Balsa Truss Tester User Guide 60006 V0212
3
Using with Bucket Tester
1. Find two supports to rest either end of the Balsa Truss Tester on,
such as two desks or tables pulled close together. Place the tester
on these supports (Figure 1).
2. Attach the bucket to the hole on
the end of the load block bar on
the tester (Figure 2). Considering
the height of the truss, try to
keep the cord long enough so the
bucket will be no more than an
inch off the floor in case the truss
breaks (you may have to place
books or blocks under the bucket
if the tables are very tall).
3. Place (additional) books or blocks
under the bucket while adding or
removing trusses (Figure 3).
4. Slide your truss into the
side of the tester between
the clear and black acrylic
sides (Figure 4). Lift up
the load block bar to slide
the top of the truss under
it. Note: If needed, the
clear acrylic shield can be
removed by unscrewing
the six thumbscrews.
Figure 1
Figure 2
Figure 3
Figure 4
Содержание Balsa Truss Tester
Страница 1: ...Balsa TrussTester 60006 V0212 User Guide...
