Operating
Instructions for
Electrical Heater Units
PITSAN
Page 9 / 16
PİTSAN MAK. SAN. VE TİC. LTD ŞTİ,
Esenyurt Yolu Üzeri No: 66 - 68 Bağlar Mevkii, TR – 34850 Avcılar - İSTANBUL
Tel.: 0212/4281885, Fax: 0212/4281661, Email:
,
http: //www.pitsan.com
HORIZONTAL DISCHARGE:
To ensure proper heating of floor surfaces, observe the following recommended mounting
limitations
Minimum recommended mounting height (to bottom of heater):
2meters
Maximum recommended mounting height (to bottom of heater):
4,5meters
Minimum clearance from walls and ceiling are (Z) :
250mm
VERTICAL DISCHARGE:
To ensure proper heating of floor surfaces, observe the following
recommended mounting limitations
X: 250mm
Y: 250mm
Z: 250mm
KANALA MONTAJ YAZILABİLİR
7.2. Wiring and Electric Diagrams
Connect the heater only to the voltage and frequency specifi ed on the nameplate.
Rough-in branch circuit wiring to the heater using wire rated for 75 degrees C. Wire heater
supply according to diagram in manual
The unit is supplied with plugs, all wiring to be in accordance with local and national
electric codes.
