Pitney Bowes Relay 2500, Руководство пользователя, Страница: 105 / 182

Beginning-of-Collation (BOC)
This mark indicates this sheet is the first sheet fed within the collation or set.
The system operates on the absence of this mark, that is, the action will take place if the mark is not read
by the scanner. It is therefore indicated on the OMR code as Not BOC.
Parity
This mark is a security feature that makes the number of marks total an even number when printed. If any
one of the marks is missed during scanning, the inserter stops so the operator can correct the error.
Re-timing Mark
This mark is mandatory in each group of OMR marks making up the code (see later in this section for an
explanation of OMR mark grouping).
It allows the inserter to recalibrate for accurate scanning. Re-timing marks count in the parity calculation.
Select Feed (SF1, SF2)
These marks are used to control the feed of material from the feeder holding the supplementary
sheets/inserts on a set-by-set basis. Therefore select feed cannot be used on a single-station inserter.
Use Select Feed 1 marks are in the primary sheet feeder to select material from the supplementary sheet
feeder. For C- and double fold, the primary feeder is sheet feeder 1. For Z- and single fold, the primary
feeder is Sheet Feeder 2.
Use Select Feed 2 marks in the primary sheet feeder to select material from the insert feeder. For C-folds
and double-folds, the primary feeder is sheet feeder 1. For Z-folds and single-folds, the primary feeder is
Sheet Feeder 2.
Auto Batch
When the auto bacth function is being used, this scan mark identifies the last sheet of a batch. It signals
the inserter to automatically stop the machine so an operator can remove the finished batch of mailpieces
and then restart the mailrun. The mark must appear on all sheets of the OMR set that requests this
function.
OMR Scanning
Pitney Bowes Relay™ 2500, 3500, 4500 User Guide December, 2018 Page 98 of 174