Pitney Bowes Relay 1000, Руководство оператора

Страница: 32 / 64

3 ● Run a Job
3-8 SV63176 RevB
Job 3
• One folded sheet
• One insert
• Into an envelope
•
Configuration required: Relay 1000 with
Insert Feeder C
NOTE : Inserts are pre-folded sheets or unfolded items such as business
reply envelopes, response cards and similar items. If your system has
the optional 2nd sheet feeder A2, you can use it instead of Feeder A1,
as long as you load and select it as described in steps 1 and 4 below.
STEP ACTION TIP
1 Make sure the paper size
setting is correct.
NOTE: This setting is not
available on all models.
Select 11” or 14” .
2 Load sheets into Sheet
Feeder A1.
Load face down and bottom
edge first.
3 Load envelopes in Feeder B. Load right way up and facing
you.
4 Load inserts into Insert
Feeder C.
Loading orientation depends on
item.
5 Press button to select
Feeder A1 .
Make sure indicators are green.
6 Press button to select
Envelope Fdr B and Insert
Fdr C .
Make sure BOTH green
indicators are lit.
7 Press button to choose Seal
or No Seal .
Make sure moistener has E-Z
Seal® or water.
8 Press the Trial Piece button
and inspect trial piece.
Trial piece will not seal - this is
normal.
9 Press the Start button to run
job.
The Stop button will stop the
system at the end of the cycle.