Pitney Bowes Relay 1000, Руководство оператора

Страница: 19 / 64

System Setup • 2
2-3 SV63176 RevB
Preparing and Loading
Once you understand the subjects covered in this chapter, you can quickly
set up and use the system for a variety of jobs as explained later in the
Running Jobs section.
IMPORTANT! Before running a job, make sure your material meets our
published specifications (refer to the Specifications chapter). This helps
assure reliable operation and greatest productivity.
Connecting Power and Turning On
WARNING! Read all the safety information at the beginning of this guide
before connecting the system.
1. Connect the power cord to the socket on the back of the system.
2. Plug the power cord into an easily accessible power outlet.
3. Turn the power switch ON.
• After a few seconds, the message “Check Moistener’” appears on
the display. This is only a reminder to check the level; it does not
always mean that the moistener level is too low.
• The “Check Moistener” message remains there until any other
button is pressed.
IMPORTANT! As an additional reminder, the “Check Moistener”
message appears every 1,000 cycles, at the end of a batch or
when the Stop button is pressed.
• When turned ON, the system remembers the last job setup, and
automatically resets the item counter to zero.