Pitney Bowes J640, Руководство оператора

Страница: 16 / 40

8. Replace the other half of the cassette. The two halves
should fit together completely.
9. Rotate the latches until they click into the locked
position ( ).
10. Check to make sure that the ribbon is loaded correctly and
that the ribbon is wound tightly inside the cassette. Turn
the gear counterclockwise with your fingers until the black
portion of the ribbon is exposed.
11. If the ribbon does not advance, or if it is hard to turn the
gear, repeat the loading procedure.
Loading Supplies –––––––––––––––––––––––––––––––––––––––––––
We recommend you use Pitney Bowes label stock. For label
sizes, see Chapter 6, "Specifications and Accessories."
You can load your supplies to
✦
peel
✦
not peel.
Refer to the following sections for information on loading for
peel and non-peel modes.
J640 Operator’s Handbook
2-6