Pitney Bowes F65A, Руководство оператора

Страница: 29 / 50

29
2. Main menu
BCR job example
The BCR data structure is not flexible but the functionality is selectable.
Program name
This section covers programming a job where scanning is required. When you program the
Feeder for a particular scanning job, assign the job a name (the number is automatically
given by the next free job number)
001> Name of new program : BCREXJOB
<>=SELECT Green=CONF. Blue=EXIT Red=GO ON
To change the text use the select buttons to add another character use the GREEN button.
With RED the name of your Program is defined.
Choice of material
The choice of Material is important to the appliance of the Double Feed detection, there
are three different settings available:
• Paper NO Double Feed detection (not recommended)
• Paper /DF Standard Double Feed detection
• Paper /DF+ Advanced Double Feed detection
001> Material : Paper /DF
<>=SELECT Green=CONF. Blue=EXIT Red=GO ON
For our example we choose Paper /DF
Version (scan method example BCR-1D Plockmatic)
In this section you can select the appropriate scanner method according to your type of
scanner. For BCR code the selection has to be:
• BCR-1D Plockmatic
001> Vers.: BCR-1D Plockmatic
<>=SELECT Green=CONF. Blue=EXIT Red=GO ON
BCR location (scanner position)
Here you select the scanner position, all available positions are defined in the Service
menu here you can only select already defined positions.
001> BCR Location: TOP-REAR
<>=SELECT Green=CONF. Blue=EXIT Red=GO ON
We select “TOP-REAR” in our example.