manualshive.com logo in svg

Pitney Bowes DM800 Series, Руководство оператора

Поделиться
Скачать
Pitney Bowes DM800 Series Скачать руководство пользователя страница 155

SV61162 Rev. C  

9-11

DM800™ Series Digital Mailing System Operating Guide

Replacing the 

Ink Cartridge

“Low Ink - Order Ink” appears on the IntelliLink® Control Center main 

screen when there is only enough ink for approximately 10 days of mailing.
You can choose to ignore this warning - refer to the 

Configuring Low Ink 

Warning

 section in 

Chapter 5

 in this guide. 

Your actual ink usage will vary depending on whether you routinely print 

advertisements or inscriptions and how may pieces of mail you print per 

day. 
“Low Ink” displays approximately two days before the ink runs out.  You 

can print about another 300 meter stamps or leave the mailing system 

running for six days without printing. If you do not have a replacement car-

tridge, order one now. Refer to 

Supplies and Options, Chapter 11

 in this 

guide. 
“Out of Ink” displays when there is no more ink left in the cartridge and 

your mailing system stops printing. In order to resume printing you must 

change the ink cartridge. 

WARNING!

WARNING!

WARNING!

WARNING!

You must use only ink cartridges supplied by Pitney 

Bowes. The use of any other ink cartridges will void 

your warranty and maintenance agreement.

The ink in the cartridge may be harmful if swal-

lowed. Keep new and used cartridges out of reach 

of children. Discard empty cartridges immediately

Do not remove the ink cartridge if the printhead 

is not installed. If the ink cartridge and printhead 

are removed at the same time, ink from the print 

supply line will flow down the tube and squirt from 

the needle in the ink cartridge holder out into the 

printer and system interior.

Make sure there is enough room to fully lift the 

main cover without bumping the IntelliLink®  

Control Center. 

Содержание DM800 Series



















































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды