manualshive.com logo in svg

Pitney Bowes DM800 Series, Руководство оператора

Поделиться
Скачать
Pitney Bowes DM800 Series Скачать руководство пользователя страница 14

1-4

SV61162 Rev. C

1 • Read this First

What You Need 

to Know

Since your postage meter (Postal Security Device) is licensed by the 

United States Postal Service (USPS), you must follow a few basic require-

ments.

USPS Requirements

•  Mail must have the correct date and postage amount in the meter 

stamp.

•  Metered mail must bear the ZIP Code location of the post office where 

the postage meter (Postal Security Device) is registered.

•  If you move to another ZIP Code location, you must update the ZIP 

Code. You can do this by calling your local Pitney Bowes district office.

•  Each time you refill your postage meter (Postal Security Device) 

through the modem, the Postage By Phone

®

 Meter Payment System 

computer automatically performs a postal inspection. If the postage 

meter in your mailing machine has not detected a modem refill transac-

tion at certain intervals, the message “Inspection Required” appears 

on the main screen of the IntelliLink® Control Center. (The system will 

then prompt you to connect to Pitney Bowes and perform an inspec-

tion.)

•  The postage tape you use must meet USPS specifications.

Safety  

Requirements

WARNING! 

Follow normal safety precautions for all office equip-

ment whenever using the DM800™ Series Digital Mailing System.

•  Read all instructions before you attempt to operate the machine.
•  Use the equipment only for its intended purpose.
•  Place the machine near an easily accessible power outlet.  Avoid  us-

ing outlets controlled by wall switches or shared by other equipment.

•  Plug the machine into a properly grounded power outlet. DO NOT re-

move the power cord’s ground pin and DO NOT use a ground adapter.

•  Make sure the area in front of the power outlet is free of obstruction.
•  Turn the machine off using the power switch (for the location, refer to 

Chapter 2, page 2-6

) and NOT from a power strip.

•  Do not place lighted candles, cigarettes, cigars, etc. on the machine.
•  DO NOT route the power cord over sharp edges or trap it between 

pieces of furniture. Make sure there is no strain on it.

Содержание DM800 Series



















































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды