8
Step
8
Install the Weighing Platform (optional)
The optional weighing platforn consists of two pieces. Place
the flat blue platform on top of the gray base unit, being sure
the four pegs on the platform fit into the corresponding holes
in the base unit.
Position the assembled weighing platform as shown. Now,
plug the connector on the bottom of the base unit the matching
connector on the DM200L.
9
Step
7
Install the Ink Cartridge
Remove the ink cartridge
from the bag. The tape
attached to the bottom of
the cartridge is designed
to remain in the bag when
the cartridge is removed.
If it doesn’t, peel off the
tape before use.
Lower the cartridge into
the cavity. The ridges on
either side of the cartridge
will slide into the grooves.
Return the guard back
to the operating position
and click to close.
Close the cover. The
system will automatically
start the printer installation
procedure.
Ridge
Groove
A
A
B
B
C
C
D
D
“CLICK”
Ridge
