Pitney Bowes DM100 Series, Руководство пользователя

Страница: 60 / 109

6-10 SDC570J
6 • System Options
Setting/Disabling the Supervisor Password
The supervisor password prevents unauthorised access to the
account setup procedures.
1. Press
Options.
2. Press Page Down twice.
3. Select "LockCode/Passwords".
4. Select "Supervisor Password". Enter a 4-digit code, this becomes
your supervisor password. You are asked to confirm the code. If
there is an existing supervisor password, you are prompted to
key in the existing 4-digit code and then confirm the code.
5. You can then press Continue to return to the Options menu.
To either disable or enable the supervisor password (if previously
used) or to change the lock code.
1. Select “Supervisor Password”.
2. Select "Change Supervisor Password".
A. To disable the lock code:
Key in 0000 and at the confirmation message, select
"Continue".
The machine will confirm that the supervisor password has
been disabled. Press “Continue”.
B. To change or create a new lock code:
At the prompt, type in a new Supervisor Password (4 digits)
and select "Continue".
Re-enter the new supervisor password again to confirm and
select "Continue".
3. Press Clear (back arrow key) to return to Options menu.